COM2B CROSSOVER MANIFOLD REGULATOR SYSTEM

Crossover Manifolds

The COM-2B Series crossover manifold system uses two PR-1-type stainless steel regulators (PR-2-type brass, optional) built in a single body functioning as the changeover regulators with the common outlet port connected to a single line regulator to provide constant unchanging supply pressure unaff ected by supply source depletion. All are mounted on a bracket complete with gauges. As the primary supply source depletes and the operating outlet pressure of the primary regulator falls below the preset changeover pressure of the secondary regulator, the secondary regulator takes over. Once this occurs, the primary regulator can be manually adjusted 1/8-turn counterclockwise, the secondary regulator is now the primary and the depleted supply source can be replaced.

Features and Specifications:

• Bracket-mounted for easy installation
• Allows changing of cylinders during operation
• Available in stainless steel, brass and Monel
• Steady outlet pressure during cylinder depletion
• 0.01% pressure control accuracy
• Inlet pressures to 6000 psig
• Outlet pressure ranges: 0–10 psig, 0–25 psig, 0–50 psig, 0–100 psig or 0–250 psig
• Changeover pressures: 15–250 psig
• Cv flow coefficients: 0.025, 0.06, 0.2, 0.5
• All connections: ¼? FNPT
• 20 micron inlet filters
• 316L stainless steel construction
• PTFE-lined stainless steel diaphragm
• Operating temperatures: -40degF to +500degF (-40degC to +260degC)

Tags: